|
The Ano-Jet DM3290 offers remote fogging, up to 10 metres
from the Anotec Odour Control reservoir.
Fog character, controlled by a valve on the power head, is
adjustable from a ULV (ultra low volume) dry fog (7-12 micron
VMD) to a heavy wet mist (30+ micron size). Ano-Jet units are
thus well suited to a wide range of applications, including
odour control, pest control, sanitising, moistening, dust
control and humidification.
The power head screws into a standard 2" NPT drum opening. It
is offered in 240VAC and includes a 3 metre power cord. A
solenoid valve keeps lines charged and prevents chemical loss
due to siphoning. And like all Fogmaster units intended for
heavy-duty use, it incorporates a motor saver brush to prevent
commutator damage at the end of the brush's life.
Ano-Jet foggers can be specified in several hose length and
nozzle end options. One option provides a thumb operated fog
ON-OFF switch at the wand so you can fog only target areas,
without treating the entire room or wasting chemical. The valve
can also be set for continuous output, if desired, for
unattended operation.
The discharge height of the Ano-Jet is limited to its suction
lift (about 1.8 metres above liquid height). For higher lifts,
use the Anotec Boost-It pump . A
repeat cycle timer is also helpful for labour savings and more
efficient chemical use in situations requiring repeated fogging.
The Ano-Jet has revolutionised the
treatment of odours within stacks / vents. The Ano-Jet
offers a single-point treatment rather than a multi-point nozzle
system. Call us for details on this exciting application
1800 636 877
Specifications
|
Motor |
1 Hp, 240V, 4.0 amp
Motor saver brushes |
|
Blower |
Balanced fan, 2 stage, 20,000 rpm
(no load) |
|
Nozzle |
High shear, counter rotating vortex.
Non-clogging design (no tiny orifices)
Fog on-off control valve (option) |
|
Hose |
4m, 7m, 10m' lengths available
(specify). Low pressure transfer pump (Anotec Boost-It
Pump) required for discharge higher than suction lift
(about 1.8m). |
|
Particle Size |
7-30 micron VMD, adjustable |
|
Chemicals |
Handles both oil- and water-based
Anotec solutions
(Liquid viscosity and density affect particle size
distribution)
Attaches to chemical drum (not included) |
|
Liquid Flow Control |
0-300 ml/min
Nine turn vernier control/memory lock |
Materials of
Construction |
Power head housing and drum adapter
- aluminium
Tubing - fuel and oil resistant vinyl
Fittings - brass
Flow control valve - glass filled nylon, stainless stem,
Viton® seal
Hose - vinyl
Nozzle assembly - Celcon w/ vinyl housing
Hose clamps and mounting hardware - stainless |
|
Dimensions |
H x L x Diameter: 39 x 32 x 22 cm,
plus hose. |
|
Shipping Weight |
Power head - 6
Kg
Hose/nozzle assembly - 3-7 Kg |
|
Warranty Period |
One year |
|
